Generally, only scattered light can be provided to ensure smooth ventilation in the curing environment, and the ambient temperature and air humidity should be appropriate. After the plants have successfully served, they will gradually resume normal maintenance management( greenhouse pots ). When we found that there was too much watering, Yulu was drought-tolerant and water-resistant. Its fleshy “Robgen” was easily rotted due to excessive watering. During the slow seedling period, it was necessary to control the light. After a while, the mother leaves would Germination began to appear.

Because spreading will inevitably cause some of the seeds to be too close to each other, nutrient competition will occur during the budding, thus reducing the rate of emergence. After placing the seeds on the culture soil, we will use a fine mouth pot to spray water and moisturize. Then, the seedling bed is covered with a transparent plastic film or transparent glass sheet, which can effectively reduce the water loss and achieve the moisturizing effect, which plays a very good guarantee for the seed.

But the roots and healthy branches can still be recovered. We only need to cut off the frosted branches, then put the eucalyptus in a warm environment, and the eucalyptus will slowly sprout. Seeds prepared in advance are sown into the culture soil(cell trays). Seeding is not recommended for sowing. The bottom layer of the basin recommends that everyone use large granules of ceramsite to improve the drainage effect of the pelvic floor. If you do not consider economic factors, then the growth of Yulu will be better.

In the environment of high temperature difference and high humidity, the state of jade dew is the best, so many flower friends choose to suffocate the jade, then the jade can just be swelled in the basin, in fact, it should not be suffocated when the root system is not long. . Suffocating must have a good root system, so that plants will not have problems in a sultry environment. Yulu has a weak root system in the upper basin, which will cause the plant to stop growing in a closed environment, and if it is serious, it will cause the plant to rot.

Then we need to properly topdress so that we can meet their normal growth needs. However, for Yushu, topdressing is usually carried out in the spring and autumn season when the basin is filled with pots or potted for 2-3 years. It is necessary to add some decomposed organic fertilizer as base fertilizer in the pot(plastic nursery pots wholesale). In order to meet the needs of its rapid growth, but also to promote its germination, to maintain its leaves more fresh green, more ornamental conditions can be properly topdressed.

According to the seedling age and transplanting period, more than 50 holes are used for grafting seedlings. Before seeding, the tray should be disinfected first, and the tray can be soaked with the solution of the mildew solution. It can also be disinfected with potassium permanganate solution, especially the old tray. The choice of matrix is ​​an important link in the seedling substrate seedling cultivation. Many seedling factories and vegetable growers in production are caused by the slow selection of the seedlings and the yellow leaves.

Flowers are extremely important plants in modern garden art, with a wide variety, colorful and ornamental. We often see a variety of flowers indoors and outdoors, but little is known about how to grow flowers, so many people take care of flowers. There are many types of flowers and a wide range. It includes not only plants with flowers, but also mosses and ferns. The flowers are not only ornamental, but also have a variety of beautiful and elegant floral meanings.

We are a professional Plastic Gallon Pots, Plastic Injection Gallon Planters, Plastic Grow Pots and Carry Trays, Plastic Propagation Tray, Plastic Flat Trays, Plastic Decorative Containers,Plastic Nutrition Pots manufacturer and supplier in China, having more than 19 years manufacturing experience, 35,000m2 workshop area, serving more than 3,000 customers across worldwide. Our Mission is to provide high quality, factory price products to you! We pride ourselves on providing a quick and efficient production turnaround for our clients, no matter the size of the order. Welcome to contact us for plastic bonsai pots free samples! We will reply within 24 hours! Wilson Garden Co.,Ltd, Name：Vincent Lee, Phone：0086-15838107808, Wechat：Wilson15838107808, Whatsapp：0086-15838107808. Email：vincentbestgarden@gmail.com.

Ivy is also a neutral plant that is warm and sunny and suitable for planting in semi-shaded areas. Usually pay attention to the amount of water, keep the soil moist, ventilated and ventilated, and fertilize regularly to grow well. Ivy can effectively counteract carcinogens in nicotine, which absorbs harmful substances through tiny pores in the leaves and converts them into harmless sugars and amino acids.

Palm tree: It can remove ammonia from the air very well. It has the characteristics of strong cold resistance, low tolerance to negatives and low risk of pests and diseases. It is also easy to feed, but usually requires trimming the tip. Suitable for growth in moist neutral or slightly acidic soils(seed starting trays). About the money tree, it is green all year round. The biggest advantage is that it absorbs harmful gases and is carried out by photosynthesis.

It is the best natural humidifier to evaporate one liter of water a day. In addition, it can effectively purify indoor air. Water not only keeps green, it also cleans the pores of the leaves. Green radish can not accept strong light, it is suitable for indoor lighting, watering every day, keeping the soil moist rather than water, water is easy to breed mosquitoes. Fertilize once every two months to make the leaves more shiny and bright, but avoid direct contact with the leaves.

The cultivation of green radish indoors can effectively absorb the chemicals in the air and dissolve the residual odor after decoration. Watering should be watered, and depending on the season and temperature, it is best to keep the soil moist. The green emperor grows at a suitable temperature of 20 to 30 ° C, the air humidity is not less than 70%, and the autumn temperature should be maintained above 14 ° C(fabric planter bags). The basin is replaced once a year in spring and the dead leaves and old leaves are removed to keep the trees beautiful.

As long as the rosemary is a seedling, it is a plant that is easy to feed. It is perennial and requires little special care. It should be noted that there is not too much watering, otherwise it will easily lead to root rot and death. If there is no rainwater in the house, it is usually watered once a week. If you completely forget to water the water, even if the rosemary has withered and dried, its branches will not change color and wither in a short time, it is not easy to detect, and you will regret it.Seeds should be smeared as sparingly as possible, or mix well with fine dry soil and spread on the seedbed to allow the seeds to fully contact the soil.

We are a professional Plastic Gallon Pots, Plastic Injection Gallon Planters, Plastic Grow Pots and Carry Trays, Plastic Propagation Tray, Plastic Flat Trays, Plastic Decorative Containers,Plastic Nutrition Pots manufacturer and supplier in China, having more than 19 years manufacturing experience, 35,000m2 workshop area, serving more than 3,000 customers across worldwide. Our Mission is to provide high quality, factory price products to you! We pride ourselves on providing a quick and efficient production turnaround for our clients, no matter the size of the order. Welcome to contact us for free samples! We will reply black plastic nursery pots manufacturers within 24 hours! Wilson Garden Co.,Ltd, Name：Vincent Lee, Phone：0086-15838107808, Wechat：Wilson15838107808, Whatsapp：0086-15838107808.

Wait until the top of the bud is unearthed, then watering, with the principle of small water and irrigation. If the soil drainage is not good, there is a similar phenomenon. A large part of the reason is that the soil is not well drained. It has not dried up after 3-7 days after watering, and the roots are rotten in the humid environment, even dead. The phenomenon of seedlings is caused by water in the roots.The cold winter is slightly slow, so you need to ensure sufficient light, but pay attention to shading in summer, rosemary is more resistant to drought, dry watering, less watering in winter, pay attention to antifreeze, usually two days in the summer.

Watering is generally more watering during high temperature, but it can’t be watered at noon, because it is very hot at the time, watering the plants is like cooking in a pot! So when it’s hot, watering in the morning and evening, other seasons, etc. Re-watering!If there is a little sign of wilting, it will be watered! If the flower pot is too large, the watering amount is not well controlled, and the rosemary grows slowly, and does not require much room for growth. If you water, you need to pour more in the summer. Generally, when the summer temperature is high, do not water at noon, once in the morning and evening. In other seasons, water is usually poured once a week.

During the curing period, water is poured according to the potting soil. If it is dry, it needs to be watered.Generally, when we see that the leaves are dry, when we plant and breed rosemary, the rosemary grows fast in spring and autumn, and the seeds grow on the bottom of the seedbed, but we must keep the surface of the soil moist. In fact, Huayou watering is based on experience. The first time you raise the rosemary, you need to pay attention. Although you need to water more, you can’t pour water. The plants are easy to wilted and the growth slows down. In addition to perennial plants, such conditions can occur with improper watering.

Directly inserted in the medium, not too tight, there are basin friends found that the management of potted rosemary is relatively simple. Rosemary prefers a mild climate, prefers alkaline, well-drained soils, grows fast in spring and autumn, and is slightly slow in winter and cold, and needs to be adequately illuminated. The first watering should be poured, and it should be poured once a week to keep the soil moist. Rosemary needs to be given a sufficient amount of fertilizer to promote growth after flowering.

The vegetable sheds are planted in many areas. The sheds are planted in many areas. It is necessary to choose the varieties suitable for China’s climate and various growth conditions for planting. In the plastic greenhouse, it is usually easy to obtain high yields in the three types of large chicken yellow or big bone green or flag leaf. Contact us for free samples! We will reply plastic grow pots within 24 hours!

We are a professional Plastic Gallon Pots, Plastic Injection Gallon Planters, Plastic Grow Pots and Carry Trays, Plastic Propagation Tray, Plastic Flat Trays, Plastic Decorative Containers, Plastic Nutrition Pots manufacturer and supplier in China, having more than 19 years manufacturing experience, 35,000 M2 workshop area, serving more than 3,000 customers across worldwide. Our Mission is to provide high quality, factory price products to you! We pride ourselves on providing a quick and efficient production turnaround for our clients, no matter the size of the order. Garden Co.,Ltd, Name:Vincent Lee, Phone:0086-15838107808, Wechat:Wilson15838107808, Whatsapp:0086-15838107808.

In order to get better income, it will be available in December and will be available for sale in March. The growth of the water spinach is very fast, so the amount of fertilizer is large. In order To get out of the market faster, we should apply enough basic fertilizer in the soil before planting, and it is best to pay attention to the use of various decomposed organic fertilizers when fertilizing. Mixed with fertilization of grass and ash.

The spinach planting generally does not sprinkle the seeds in the field. The, the seeds need to be placed in the water to soak. Because the spinach seed coat is thick and hard, it can be directly germinated slowly in The field. If the water control is not good, the seed is easy to rot, so the germination treatment should be carried out first. Then it is germinated in a germination box, and then when the seeds are white, they can be sown.

The soil must be fully cultivated, and the planted land must be incorporated into a cockroach. When planting, pay attention to no more than two kilograms of seed per acre. Spreading the seeds, the seeds are covered with a layer of fine soil, which Can better promote the seedlings. When planting, about 3cm can be opened, and the distance between the groove and the ditch is about 16cm. After the seeding, some water can be drenched on the soil, which can actually improve the survival rate of the Seedlings of the spinach.

if we plant the water spinach in the greenhouse, it is mainly cultivated in autumn and winter. It has a unique taste and can protect the intestines very well, so it is liked by many people. When we grow in a greenhouse, we Usually is to arrange to start planting after October. It is best to note that the seeds can be wrapped in wet gauze for about 20 hours. The spinach can usually be spread or broadcast in the field.

At the same time, the spinach prefers a warm living environment., when is planting in the greenhouse, it is necessary to do the sealing work in time. First, try to ensure that the temperature in the shed can reach about 10 degrees, otherwise The second part is about fertilizer and water control. Because the growth cycle of the spinach is short, it has to be harvested several times, and it is topdressed after each harvest, so that sufficient water supply can be maintained .

Welcome to contact us for free samples! We will reply black plastic nursery pots within 24 hours! We are a professional Plastic Gallon Pots, Plastic Injection Gallon Planters, Plastic Grow Pots and Carry Trays, Plastic Propagation Tray, Plastic Flat Trays, Plastic Decorative Containers, Plastic Nutrition Pots Manufacturer and supplier in China, having more than 19 years manufacturing experience, 35,000m2 workshop area, serving more than 3,000 customers across worldwide. Our Mission is to provide high quality, factory price products to you! We pride ourselves on providing a quick and efficient Production turnaround for our clients, no matter the size of the order. Wilson Garden Co.,Ltd, Name:Vincent Lee, Phone:0086-15838107808, Wechat:Wilson15838107808, Whatsapp:0086-15838107808.

The culture time after inoculation in a good seedling bottle is more than 4 months, the height is 3/4 of the height of the culture bottle, and the height is 7-8 cm. The number of roots is large from the bottom of the Bottle, and the root hair is white and slender. The golden lotus seedlings should be re-smelted before planting. The golden lotus seedlings should be removed from the culture room, and placed in a ventilated and ventilated greenhouse for 15 to 20 days at room Temperature to promote the lignification of the seedlings to adapt to the temperature and humidity of the planting environment. After the seedlings are planted, they can emerge.

It can be pre-arranged to be transported by vehicle to the designated litchi forest planting site one day in advance. Use the method of breaking the glass bottle to remove the wound to reduce the wound. Use the tail of the vehicle safety escape hammer tool To tap the bottom side of the glass bottle and drop the bottom glass. Then shake the glass bottle and carefully remove the seedling from the culture bottle at the bottom. Be careful not to force it. Strong pull, do lightly wash gently to avoid injury To the seedlings, resulting in subsequent planting disease infection.

After the golden lotus seedlings are taken out, they are manually placed under a certain pressure water spray head to clean the culture medium. When cleaning, the hands should be gentle, and try not to damage the seedlings. After washing the culture medium, the The seedlings of the tissue culture flasks are properly graded, and the seedlings of the cultured seedlings are eliminated from the ineffective seedlings. At the same time, the leaves are not unfolded, the unqualified broken seedlings, the yellowing, the mixed and the mutant seedlings should Be cleaned and removed. After the unqualified seedlings are discharged according to the two standards of bottle size.

Then take it up and wait for the water to cool and then move it to the planting area where seedlings are needed and distribute it to the workers for planting. Use the hidden space under the litchi forest to build a plastic film small arch shed, use The plastic basket cushion sorghum discharge seedling tray facility to plant the golden lotus, the lychee planting should pay attention to ventilation and ventilation, the general light intensity is 4000lx, direct sunlight can be used around The outer cover is covered with a sunshade net and the Inside of the lychee is kept ventilated.

The planting raft arrangement selects the horizontal plane of the lychee garden, and the length of the ridge is 30~50m. The plastic film is small and the shed is built. When the plastic slab is built, the end point of the two people is The straight straight, and the side of the straight line is inserted into the soil with the tip of the iron. After the 20cm lead hole, one end of the bamboo arch is inserted into the cavity, which is called the same operation. Is symmetrically separated by 1m, and the bamboo arch is fixed by straight line. The middle of the plastic basket can be placed in the middle of the concrete to leave a gap of 20cm.

After planting the alfalfa, 4mL plastic film is placed on the bamboo arch cover. The two sides of the film should not be fully unfolded. Only half of the bamboo arch is covered to cover the upper part of the curved arch, which is 1/ 3 of the bend. The bottom is not pulled down and closed, which is convenient for placing the seedling tray and pouring the root. Water spray operation, the two ends of the wooden fence, the pointed wooden sticks are nailed into the soil to Fix the small arch shed, and finally the two arches are attached to the film with a cloth rope tied to the ends of the bamboo arch. Real film.

The temperature will gradually decrease. At this time, it is necessary to reduce the number of times of bumping and fragrant watering, and see that the surface of the soil has been properly watered. You can also pour some rain. In sunny weather, the bumps should be exposed to the sun. And put it in a place with plenty of light in the open air, so that the bumpy incense grows better. When there is frost in the early winter, keep the basin soil dry and continue to let the bumps absorb the light. If it is placed in the balcony, you can water it in moderation.

We are a professional Plastic Gallon Pots, Plastic Injection Gallon Planters, Plastic Grow Pots and Carry Trays, Plastic Propagation Tray, Plastic Flat Trays, Plastic Decorative Containers,Plastic Nutrition Pots manufacturer and supplier in China, having more than 19 years manufacturing experience, 35,000m2 workshop area, serving more than 3,000 customers across worldwide. Our Mission is to provide high quality, factory price products to you! We pride ourselves on providing a quick and efficient production turnaround for our clients, no matter the size of the order. Welcome to contact us for square nursery pots free samples! We will reply within 24 hours! Wilson Garden Co.,Ltd, Name：Vincent Lee, Phone：0086-15838107808, Wechat：Wilson15838107808, Whatsapp：0086-15838107808.

Stop fertilizing. Cover it with plastic cloth at night, unravel during the day and continue to receive light, but leave a place for ventilation on the covered plastic sheet. When it reaches zero or the temperature is lower, you need to take the bump from the open air to the balcony or the place where there is light in the room. You still need to touch the sunlight to the sun. The balcony should be kept ventilated and breathable. You can often open the window and let the window Touch the fragrant touch with fresh air to promote growth.

At the beginning of the early autumn and winter, and below zero, stop watering. At night, pay more attention to finding suitable coverings to maintain the temperature. After the bumps are made in the winter, they can be placed in the spring. When the early spring arrives, you can let the sun shine with the sun, but you don’t need to water it so early. In short, wait until the formal warmth to re-water. Then when the temperature rises, it will welcome a new round of growth.

The blade that touches the scent does not shrink under swell pressure, but the pores that are used for ventilation inside expand, and a volatile apple-scented substance diffuses into the air along the pores. In fact, the usual touch of incense will also give off a faint scent, but this scent is not easy to be noticed. When its leaves are touched, the stomata of the leaves expand and the scent is emitted, which is smelled and given. It feels like a touch.

The main job during this period is to keep warm. However, this method of matching soil is more suitable for growing strong stone flower varieties. After the bumps are inserted, the water is poured once and placed in a cool, ventilated place. After that, stop watering. If the soil is too dry, spray water vapor around it to increase the humidity of the air. After two weeks, you can water it. After ten days, it will grow roots, and after half a month or so, new leaves will grow.

If you don’t pay attention to it, unlike the mimosa, it is placed in the open air with a touch of incense, short plant type, prominent meat quality, high internal moisture content, crystal clear and transparent, and high ornamental value. For those who like to raise meat, Health stone is a good choice. Even if you like to raise meat, there are still many pottery friends who need to improve the skill of the fleshy basin. Many people have died due to improper potting.

We are a professional Plastic Gallon Pots, Plastic Injection Gallon Planters, Plastic Grow Pots and Carry Trays, Plastic Propagation Tray, Plastic Flat Trays, Plastic Decorative Containers,Plastic Nutrition Pots manufacturer and supplier in China, having more than 19 years manufacturing experience, 35,000m2 workshop area, serving more than 3,000 customers across worldwide. Our Mission is to provide high quality, factory price products to you! We pride ourselves on providing a quick and efficient production turnaround for our clients, no matter the size of the order. Welcome to contact us for plug trays free samples! We will reply within 24 hours! Wilson Garden Co.,Ltd, Name:Vincent Lee, Phone:0086-15838107808, Wechat:Wilson15838107808, Whatsapp:0086-15838107808.

We all know that most plants like acid soil, so when the soil becomes alkaline soil, it is very unfavorable for the growth of plants. When the soil is too alkaline, what should we do? The best solution after soil anti-alkali The way is to change the soil, but it is not possible to change the soil anytime and anywhere. If the temperature is too low, the plant is in the flowering period, etc. It is not suitable for soil replacement, then we can only solve it by other means.

Dilution with vinegar and water in a ratio of 1:100 can improve soil alkalinity and bactericidal effect. It is worth noting that before using vinegar, look at the ingredient list if it contains more chlorination. Sodium (NaCl salt) is not suitable for watering flowers. Cut the leftover orange peel into small plastic bottles, then add 7 points of mineral water for fermentation. After 30 days, ferment the fermented orange peel water with water to improve the soil alkalinity or plant. Very good fertilizer.

When fermenting orange peel water, you should open the bottle mouth and deflate for a few days to avoid the bottle bursting. Watering plants is best to choose mineral water, filtered pure water, rain water, fish water, which can prevent alkalization of potting soil and provide plants with better nutrients. If you must use tap water to water the flowers, you should also connect the tap water in advance, and then water the flowers after a period of time, which can slow down the alkalization of the soil.

With the loss of nutrients, the soil will gradually appear to be knotted. After the soil is compacted, the roots will not absorb well, so it will seriously affect the absorption of plant nutrients. If you can’t change the soil in time, you can try the following methods to improve it. . Further away from the root system, poke a few holes with a small wooden stick and fill the hole with sand. Because the sand has good air permeability and strong fluidity, it greatly increases the permeability of the plant roots and alleviates the problem of basin soil compaction.

If the basin soil is in the early stage, then you can add the appropriate amount of thin fertilizer to the soil of the potting soil, which will make the soil fertile and provide nutrients to the plants. It should be noted that the fertilization should be thin and fertile. , away from the root system. The method of avoiding the soil compaction is to use the pottery clay, peanut shell and other media to bottom the bottom, to increase the permeability of the soil, and to avoid the use of tap water for watering. If there is mold in the potting soil, then you must pay attention to it.

We are a professional Plastic Gallon Pots, Plastic Injection Gallon Planters, Plastic Grow Pots and Carry Trays, Plastic Propagation Tray, Plastic Flat Trays, Plastic Decorative Containers,Plastic Nutrition Pots manufacturer and supplier in China, having more than 19 years manufacturing experience, 35,000m2 workshop area, serving more than 3,000 customers across worldwide. Our Mission is to provide high quality, factory price products to you! We pride ourselves on providing a quick and efficient production turnaround for our clients, no matter the size of the order. Welcome to contact us for propagation tray free samples! We will reply within 24 hours! Wilson Garden Co.,Ltd, Name:Vincent Lee, Phone:0086-15838107808, Wechat:Wilson15838107808, Whatsapp:0086-15838107808.

We should apply phosphorus and potassium fertilizer for it, dilute it with water 1:1000 times, mix well and then root to add the nutrients needed for flowering to the longevity flower to ensure that the plants can produce beautiful flowers. Although the flowers of the longevity flower are small, but the number is large, the original clusters are together. In addition to consuming a lot of nutrients, we also need to provide sufficient water. Under normal circumstances, when the soil moisture is less than 10%, it is necessary to water in time to ensure that the humidity can reach 80% or more.

Therefore, hydration must be timely and appropriate. Flowering plants are generally inseparable from light during flowering, and for most plants, the more complete the flowering period, the stronger the photosynthesis, the more nutrients are synthesized, and the more beautiful the flowers are. However, the flowering period of longevity flowers is usually from February to May. After entering May, the intensity of sunlight is relatively large, especially at noon. When the light is too strong, it is easy to cause the newly grown flower buds to wilting and falling off.

As long as the conditions are appropriate, the longevity flower leaves can often succeed. Therefore, when we have a strong light at noon, we must take the necessary shading measures to avoid providing sufficient light for this period of time. This will not only prevent the flowering of the longevity flower from wilting and falling in advance, but also help it to bloom. It can be said that the experienced potted friends naturally know that longevity flowers are succulent plants, and originality has many commonalities compared with succulents.

Do you need to pruning after longevity flowering? This is a must. In the end, we have necessary trimming the longevity flower after flowering, and naturally we will leave a cut. Originally, in order to stimulate the plants to sprout more branches and promote their normal growth, usually after pruning, some water should be sprayed to the cut. Longevity flowers are not suitable for immediate watering after transplanting. The process of leaf insertion is also very important. It is necessary to wait for the wound on the fresh blade petiole to dry before proceeding.

The longevity flower of the leaf is usually carried out in the spring, because the growth of the plant is most active in the spring, and it is easier to survive after the leaf is inserted. If the longevity flower is short of water during the flowering period, it will cause the flower buds to wither and fall off in advance. Generally, when the longevity flower begins to appear flower buds for about 10 days, we need to add phosphorus even at this time. If all of the above conditions are met, there is basically no problem with longevity flower germination.

In the practice of potted longevity flowers, the choice of flower pot size is mainly determined according to the size of the plant, but the general principle is that the diameter of the flower pot is larger than the diameter of the bowl. Generally, a flower pot with a diameter of 20 cm and a depth of 15 cm should correspond to a longevity flower with a planting height of 30 cm or less; if the height of the longevity flower reaches 40 cm, the corresponding flower pot should also use a larger one. It is generally grown in pots with a diameter of 25 cm or more.